Skip to content Skip to sidebar Skip to footer
Diamond Polishing

1- Initial dry polishing with a metal system 40-80-120

2- Repair of holes and cracks with polishable polyurethane

3- Application of Pentra-Sil densifier and metal polishing 200

4- Resin system polishing 200-400-800-1500

5- Application of Pentra Finish penetrating sealer and burnish 1500

Technical Data Sheet

Technical Data Sheet

Technical Data Sheet

 
Lithium Treatment

Concrete sandblasting with multiple diamonds followed by a lithium treatment is a lithium silicate solution used for densification, sealing, and dustproofing concrete surfaces. The densifier penetrates and chemically reacts with the concrete surface, producing extremely hard and dense calcium silicate hydrate (CSH) in the pores. The result is more durable, easier-to-clean concrete, resistant to water, salt, and mild chemicals. Since the lithium-silicate-concrete reaction occurs within the concrete, the protection provided by the densifier will never peel or flake, is not affected by moisture, and lasts much longer than that provided by sealing agents and surface coatings.

Technical Data Sheet

 
Sand and Seal

Concrete sandblasting with multiple diamonds followed by an application of EUCO DIAMOND HARD is a unique blend of silicate and siliconate polymers that penetrates concrete surfaces and chemically reacts to provide improved surface density, durability, and abrasion resistance. Treated concrete resists dusting and tire marks and is easier to maintain. Over time, EUCO DIAMOND HARD provides concrete with an attractive, non-peeling, non-fading, and non-wearing luster.

Technical Data Sheet

 
Self-Leveling Polishable

Self-leveling, polishable, high-performance underlayment providing a fine aggregate finish, designed for accelerated resurfacing of horizontal wear surfaces. Offered in gray color and dries in 2 to 3 hours.

Technical Data Sheet

Technical Data Sheet

514 224 6775